Tag Archives: asus deluxe

Asus Crystal Sound on x99 Deluxe audio problem

with BIOS 1601 the problem somehow disappeared for now. however i wasn’t happy with the digital to analog converter since it requires additional power supply and using usb power insead of power supply was a bad choice since the emitted frequencies i had earlier were injected in that converter too  through USB. What i then did was buying a Mass-Loop Devider (i dont know the correct english term for this). And even without this tiny piece the “noise” is almost gone.. In case it was a mass loop i can not tell where “problem” relied. It is not clear if the BIOS update was part of the solution or not. Could also have been any electrical device of my neighbours.



“Meanwhile i do not know who to blame but due to the problems that came up with Asus Motherboard i kept throwing la culpa at Asus.”

Read the Updatepost >>

Additional noise / frequency / ground loop (?)

As soon as my graphics card now is under load – the mainboard or its components emit some additional frequencies… Audio Jacks / Chinch have been used. The problem didn’t exist in the past but i can’t tell when it occured. I don’t play games very often using my Hifi. Cable etc. has been tested and even different sources. In the end its the computer the additional frequency is originating from.

Sobald die Grafikkarte unter Last gerät kommt am Audio Ausgang ein zusätzliches Geräusch hinzu. Hört selbst. Zum Einsatz kommen normale Klinke / Chinch Kabel. Kabel u.s.w. sind getestet. Auch verschiedene Quellen. Problem ist der Rechner.


I will just record the versions i’ve tested

Bios Version 1305 / 1401 / 1502
(no matter if overclocked or not)

Audio Driver

Driver Ver. 344.11

The Crystal Sound isn’t that crystal when the PCIe slots are stressed it seems. Other cause could be an emitted electronical field to the soundchip? But why did i not experience it on previous versions? What did i forget? What did i miss?



Mass-Problem or emitted by components

Some people would consider this a Mass-Problem. And they may probably right. All cables have been changed and all components are on the same power-socket. When i connect the cable to he mobile the noise can not be reproduced. The source may be the graphics card / mainboard / sound chip. Any toys like Bluetooth and WiFi are disabled.



Asus x99 Deluxe BIOS Ver. 1305

slight base Vcore increase

So many BIOS Versions have been released by ASUS for the x99 Delux series. What you might experience with 1203 and 1305 is a slight increase of “base voltage” on the Vcore.

When i keep using my old offset values (0.24 V) for the Vcore i do get 1.3 V on that i7-5930K. Pre 1204/1305 i did get 1.28 V.  Thats an increase of 0.2 V just by updating the BIOS.


CPU seems to respond better to what you throw at it

What i did also notice is that the CPU does respond, let’s say, more accurately to the frequencies and voltage you put through. It feels more straight.

In the past i could clock the CPU to 4.6 GHz @ 1.3 V and were able to boot and use Windows. That’s no longer possible. I would have to add quite a lot more voltage ontop of it to get it going at these settings.

What did the board achive so far with 1305?

Currently (02. feb. 2015) i am at


CPU freq. RAM freq. Uncore freq. CPU Vcore RAM Vcore Uncore
4350 Mhz 3070 MHz 3584 MHz 1.32 V 1.35 V 1.2 V


I just started to play with it and will slightly decrease the Vcore. I am still using offset values. Go Offset!




Old sad story – prime95

After all the trouble and questions we had regarding prime95 and Hasswell-E. I decided to run prime95 tests with the Kraken x60 at “silent” and at “custom” mode.  I noticed that Core 0 is behaving quite unimpressed – because the Worker 0 in prime95 stopped stressing the Core for unknown reason. Kraken x60 is a ready-to-use watercooling solution for noobs and lazy people. However as you can see in the bottom box in Kraken Cam, the temperature peaked at almost 90 °C (86 °C) with “silent” configuration.


BUT: this was NOT a prime95 HEAT test. Keep that in mind. Just ordinary stress test.


So i started the prime95 test again due to unknown abstinence of Core 0 and the temperature peaked at 78 – 81  °C.  Fans are NOT at 65%, Kraken CAM is fooling us here.



LED of your Kraken Heatsink lit up 24/7?

If you want your LED flavoured Kraken/Watercooling Heatsink to not glow when the system is powered off, change the ErP Setting in the BIOS to “S4 + S5”.

I still use Kraken x60 standard Fans. I do want to change those since weeks, or months but never completed this task yet. Maybe you can recommend some.


Asus x99 Deluxe on its way to the manufacturer

Update 12. Dec. 2014:
3 weeks later and still waiting for my mainboard. This really is “a bad situation”. It’s not like we still were back in th 80s or 90s  where shipping takes weeks. I wonder what they are doing there. I’m disappointed. Just imagine they had 1 week to receive the mainboard one week to work on it and another to send the mainboard back to me. What the heck is Asus thinking? This was my last Asus product for sure.


Today it happend. I finally brought the Asus x99 Deluxe in to my local hardware dealer to send the board back to Asus. To be honest, i hoped my dealer will keep my old board and let me chose a new one. I will now summarize some problems i was facing. Things became worse during time.


Mystic behaviour: Power on!

Right in the first month it happended once, that i woke up, went into my living room and my computer was powered on. It should be powered off. Hey i’m a computer junky and strange things happen frequently, especially to my mind. Sometimes i even doubt my memories because of that littl sleep i often get. When i saw my computer powered on, i couldn’t believe it and almost instantly rejected the things going on in my head and said to myself “Oh i forgot to power it off….”. So this was the first time.
It happend again yesterday, but i was absent.


The standby problem

I already talked about it. The system was sometimes hard to wake from standby mode. It was possible to put the system into standby but not to wake it, most times. And now a few days ago it also was hard to put it into standby mode. So things are getting worse.


What you like for dinner?

My BIOS decided to forget about its boot-settings. This happend only once in 2.5 months.


System hang during boot

i had my first system hang few days ago during boot. Windows 7 was about to animate its logo / load its bootscreen and the Windows Symbol was about to load but stopped.


US what? USB?

I was able to wake my system from standby the next day but it seemed that the USB devices got power but are not recognized. Keyboard and mouse dead. Nothing. Asus x99 Deluxe was like “OK, that’s it, i’ma shut down” and  the system shut down. No reboot. Silence.


Sad but necesary

And then, when things like this happen to you frequently and when you read about Asus x99 Deluxe boards, which burn through your CPU and everything else or turn into “fire” (some people reported a little blue blaze/flame when a component on the board died), then you reached that moment to bring the board back to where it came from. I RMA’d it today.

Its a sad story because this board did perform very well in any benchmark tests, especially in those bigger tests performed by other, bigger tech-sites, but i fear that the problems will never disappear or get solved by asus. I fear that they simply replace the board and that i get a new monster. New but fraught with the same problems. Hope is all you can have at this point.


Stock or Overclocked?

Some of the mentioned problems occured with a OC’ed system, some other occured with a stock system. I didn’t try to reproduce every behaviour under different circumstances but i can tell you that i played a lot with the mainboard and its settings. Starting with slight changes and getting as deep and detailed as possible. I did touch almost all voltage settings you can alter in the BIOS. One thing i didn’t do was playing with memory-timings. It will take weeks to go through all settings and find the “evil” ones causing the system to drive you nuts. Every change follows a test, which in most cases is nothing else than using your computer like you do on daily basis. Only performance tests can be performed intantly in short time. However, the story continues as soon as i get my MOBO back.

Asus Deluxe BIOS 1004 x99 – Problems solved?

Update 06. November 2014:

One good thing i have to mention is, that i had no problems yet to wake the system from standby-mode nor did i have any problems that occured with BIOS 0904. BUT I went to do the shopping and put my system or tried to put my system into standby-mode, but it never did. This is a strange behaviour.


I was talking with a guy “Wei Liu” about these issues and he told me that increasing VTT voltage may help here. He just heard of it or read it somewhere. So i decided to increase voltages. What i didn’t mention yet is, that with BIOS 1004 i tested only with stock-settings the first days. Now when i will run the system oc’ed i’m going to apply the tips. Results coming soon.



Asus Deluxe BIOS 1004 released in the end of October

I’m currently testing the Asus Deluxe BIOS 1004 they obviously released already in october. I didn’t notice that. However the first 3 tests were successful. Which means the standbymode, that i mentioned in a previous post with BIOS 0904 (and earlier), did work properly with 1004 (… to their Downloadpage)  so far. But the last test is pending. The standby-problem tend to occur, when the system is cold, what indeed is currently not the fact. Even a 10 minuten power-break doesn’t simulate a cold system correctly. I have to wait, then when i wake up the next time to proceed with it.

Asus Deluxe BIOS 1004 - Problems solved?
Asus x99 Deluxe


Few words about the previous BIOS 0904

By time passing by, i experienced some other problems with the previous BIOS 0904. Once it happend that the system forgot about the Boot-Settings. Another strange situation came up, when the system started on its own after a clean shutdown.

I will try observ this too for sure on the new BIOS 1004. Or lets say, you can’t ignore these mal-behaviours since your perception can’t elude these.

Nothing solved at this moment. Status is open.